Pump Mounts
Speeds assembly time, ensures shaft alignment
and improves compactness and appearance. |
 |
Pump
Mount
Adapts 5 hp Briggs and Stratton Engine to
SAE “AA” 2 bolt pump.
Fabricated from
aluminum.
POW#03 |
$98.00 |
 |
Pump
Mount
Adapts 10 hp Briggs and Stratton
Engine to SAE “AA” 2 bolt
pump.
Fabricated from steel
for greater durability.
POW#02 |
$98.00 |
 |
Pump
PTO Bracket Kit
Instructions and drawings for
mounting PTO pump using bracket kit. Kit also contains flame cut steel
bracket with 2 angles.
For SAE “B” 2 bolt
pump.
(Snap adapter shown
sold separately)
Pump PTO Bracket Kit |
$50.00 |
|
Engines with Fuel Tanks and
Mufflers
Available |
 |
18-HP
Briggs & Stratton I/C
Vanguard V-Twin engine with recoil and electronic ignition, muffler, 1 ¾
gallon fuel tank, bracket and clamp. Has a 1” x 2 29/32” shaft, ¼”
keyway; 3/8”-24 tapped end. Use our Pump Mount (POW#02)
with this engine.
Engine-18hp |
$1789.00 |
 |
Briggs
and Stratton 10 hp Intek I/C
industrial/commercial, #
2054370041E1H1001. Used on 821 or 728 with split hydraulics
Engine-10hp |
$929.00 |
 |
Flex
coupling to mount your engine to
pump. Synthetic rubber inserts between the coupling halves.
Available to fit ½”, ¾” and 1” engine and pump shaft sizes.
Coupling |
$29.25 |
 |
Snap
Adapter with a 1 3/8” x 6”
spline to mount your PTO to pump.
Bore size 7/8” ,
Keyway 3/16” & ¼”
Pump-PTO adapter |
$69.95 |
 |
Gage
Kit
Used to adjust the control valve
to a custom operation pressure. Includes a pressure gage with plexiglas
crystal, aluminum dial, and white background plus the fittings to plumb
into 3/8” NPT pipe threads.
Gage Kit |
$45.00 |
 |
Gage
Pressure gage with
plexiglas crystal, aluminum dial, and white background with NPT ¼”
ports
Gage |
$55.00 |
 |
Breather
Cap for petroleum based
products. Filters air intake
into the tank. Features glass-filled nylon construction and polyurethane
foam element. 0.75”NPT, 10
micron, 2.25” length.
HYD#03 |
$9.95 |
 |
Spin-on-Filter
Filters the fine dirt from your oil line to protect the pump and add
longer life to your hydraulic system. Has 10 micron w ¾” ports,
15 psi by-pass and max 15 gpm for return line.
HYD#03 |
$34.50 |
 |
|
Weldable
Black Steel Pipe Coupling
For use on oil tanks to
connect to filters. ¾” Diameter
Black
Coupling ¾”
|
|
Weldable
Black Steel Pipe Coupling
For use on oil tanks to
connect to Breather Cap
Black
Coupling 1-1/4”
|
|
|
 |
Suction
Strainer-TMF 10 – 1¼ for free-standing CADDiggers. Filters coarse dirt in oil
line to protect the pump. Has ¾” ports
HYD#98 |
$32.25 |
|
Hydraulic Wheel Motors
Speeds assembly time,
ensures shaft alignment and improves compactness and appearance. |
 |
Hydraulic
Motor
High Torque, Low Speed.
15.9 cu in., 1-1/4” tapered
shaft, 5 bolt on 4-1/2” pattern
*****For Faster speed,
less power ******
POW#03 |
$510.00 |
 |
Hydraulic
Motor
High Torque, Med Speed.
32.7 cu in., 1-1/4” tapered shaft
Max inlet pressure
1500#144 |
$510.00 |
